EasyManua.ls Logo

anko VC-9790 - User Manual

anko VC-9790
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Vacuum Cleaner
For Household Use Only
Model No.: VC-9790
Rev 1
Note: This appliance's specifications and/or components are subject to change without prior notice.
If any Accessories should fail during use, please call 1300 105 888 (Australia) or 09 8870 447 (New Zealand) for an
immediate replacement. This will save you from returning the product to the store.
If we can assist you in any other way, please feel free to contact us

Questions and Answers

  • P
    Penny DodsonAug 5, 2025
    What to do if my anko Vacuum Cleaner won't turn on?
    • J
      jameshendersonAug 6, 2025
      If your anko Vacuum Cleaner isn't turning on, ensure it's properly plugged into a working power outlet and switched on. Test the outlet with another device, such as a lamp, to confirm it's providing power. Also, check the On/Off switch on the vacuum cleaner. Refer to “Overheating / Stopping” if the motor thermostat has tripped.
  • M
    Marissa HernandezAug 10, 2025
    Why is my anko VC-9790 suction not strong?
    • B
      Benjamin VasquezAug 11, 2025
      If your anko Vacuum Cleaner's suction is weak, try the following: * Clean or replace the filters and empty the dust canister. * Check for and remove any blockages. * Ensure the flexible hose and dust canister are correctly connected.
  • D
    dwestAug 15, 2025
    What to do if my anko Vacuum Cleaner is overheating and stopping?
    • N
      Nancy JacobsAug 16, 2025
      If your anko Vacuum Cleaner is overheating and stopping, clean or replace the filters, empty the dust canister, and check for any blockages. After doing this, allow the vacuum cleaner to cool down for up to one hour before attempting to restart it.
  • D
    Deborah RodriguezAug 20, 2025
    Why is dust escaping from the dust canister of my anko VC-9790?
    • S
      smithjuliaAug 21, 2025
      If dust is escaping from the dust canister of your anko Vacuum Cleaner, try these steps: * Empty the dust canister. * Make sure the dust canister, hoses, and filters are correctly fitted and properly connected. * Ensure the filters are clean and not blocked.
  • P
    Patricia CareyAug 26, 2025
    Why is my anko VC-9790 Vacuum Cleaner making so much noise?
    • A
      andrewharrisonAug 26, 2025
      If your anko Vacuum Cleaner is operating noisily, clean the filters and empty the dust canister. Also, check for any partial blockages and unblock them.
  • L
    lauren92Aug 30, 2025
    How to prevent static shock from my anko VC-9790?
    • B
      Beth HunterAug 30, 2025
      If static shock from your anko Vacuum Cleaner is a problem, try wearing insulating footwear such as rubber or leather-soled shoes while vacuuming. Alternatively, increase the humidity or heat level in the room, or both.

Summary

Warnings

Safety Direction

Transporting your Vacuum

Components

Assembly Method

Fitting; Removing the Handle

Detailed steps for attaching and detaching the vacuum cleaner handle.

Crevice; Brush Tool Holder

Instructions on how to store the crevice and brush tools on the vacuum cleaner.

Power Cord Storage

Floor Head Height Adjustment

Safety Devices Operation

Power On; Off Switch

Floor Head Release

Crevice; Brush Tool

Flexible Hoses

Emptying the Dust Canister

User Maintenance

Cleaning Filters

Guidance on cleaning the main filter located within the dust canister.

Pre-Motor Filter

Steps for accessing and cleaning or replacing the pre-motor filter.

Dust Canister

Instructions for washing and drying the dust canister itself.

Cleaning the Vacuum Cleaner Body and Tools

Methods for cleaning the exterior of the vacuum and its accessories.

Cleaning the Rotary Brush Bar

Procedure for removing tangled hair or threads from the rotary brush bar.

Troubleshooting

Warranty Against Defect

anko VC-9790 Specifications

General IconGeneral
Brandanko
ModelVC-9790
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals