Page 8 of 23
5.2 Crevice / Brush Tool Holder
Take the Crevice / Brush tool and stow it on the back of the
vacuum cleaner as shown.
6 Power Cord Storage
There is provision for storing the power cord when not in use.
There are two hooks on the back of the vacuum cleaner for
winding the cord.
The top hook can be rotated for easy removal of the cord when
getting ready to use the appliance. Simply rotate the top hook
180º so that the cord slips off.
When storing the cable back onto the hooks, make sure the top
hook is pointing up. (i.e., rotate back to the original position).
To Next Page
Loading...
