E.5 Measurement
E-17
endix
ppendix E
measurement processing. Execute the next command after the
expected value has been detected.
*2: If no directory exists for saving measurement results ("C:\Test" in
this example), one must be created beforehand by the user. Saving
using the same file name ("example" in this example) will overwrite
the previous results. Alter the file name if you wish to repeatedly
save results.
*3: Saved BIN results can be loaded by sending the following command
with the Bathtub measurement screen open.
:SYST:MMEM:BATH:REC "C:\Test\btexample"
To Next Page
Loading...
