Anritsu MP1800A - Status Commands

Chapter 7 Remote Commands
7-2
7.1 Status Commands
This section explains the Alarm/Error status commands for the MP1862A
56G/64Gbit/s DEMUX.
:INSTrument:DEMUX[:EVENt]?
Response <numeric>=<NR1 NUMERIC RESPONSE DATA>
0 to 2112 Sum total of the bit of event register (DECIMAL)
Available bit
64 (Bit 6) Delay Busy
2048 (Bit 11) Delay Calibration Require
Function Queries event at 64Gbit/s DEMUX status.
Example > :INSTrument:DEMUX:EVENt?
Or
> :INSTrument:DEMUX?
< 64
:INSTrument:DEMUX:CONDition?
Response <numeric>=<NR1 NUMERIC RESPONSE DATA>
0 to 2112 Sum total of the bit of condition register (DECIMAL)
Available bit
64 (Bit 6) Delay Busy
2048 (Bit 11) Delay Calibration Require
Function Queries condition at 64Gbit/s DEMUX status.
Example > :INSTrument:DEMUX:CONDition?
< 64
:INSTrument:DEMUX:PTRansition <numeric>
Parameter <numeric>=<DECIMAL NUMERIC PROGRAM DATA>
0 to 2112 Sum total of the bit of transition filter (DECIMAL)
Available bit
64 (Bit 6) Delay Busy
2048 (Bit 11) Delay Calibration Require
Function Sets the transition filter (positive transition) of the 64Gbit/s DEMUX status.
Example To set the transition filter (positive transition) of the 64Gbit/s DEMUX
status to 1:
> :INSTrument:DEMUX:PTRansition 64