Anritsu MP1800A - Bathtub Function

Chapter 4 Window Operations
4-26
4.9 Bathtub Function
The Bathtub measurement for 64 Gbit/s input data is available only
when all of the following conditions are met:
•
MP1862A is connected to MP1800A to which MU183040A/B or
MU183041A/B is installed.
•
MU18304xA/B is in the 2ch Combination state.
•
The DEMUX-ED button is on.
To use the Bathtub function, click the
Auto Measurement
module
function button, and then click
Bathtub
. See the MX180000A Signal
Quality Analyzer Control Software Operation Manual for details.