Anritsu MS2690 - Page 1279

Chapter
４
Native Device Message Details
4-197
4
Native Device Message Details
Spurious Emission measurement Query and Response
Query
RES?
Response
(When Spurious Emission Result Type is Worst)
judge,spur_1,range_1,freq_1,peak_1,margin_1,limit_1,j
udge_1,spur_2,range,freq_2,peak_2,margin_2,limit_2,ju
dge_2
•••••
spur_20,range_20,freq_20,peak_20,margin_20,limit_20,j
udge_20
(When Spurious Emission Result Type is Peaks)
judge,spur_1,range_1,freq_1,peak_1,margin_1,limit_1,j
udge_1,spur_2,range_2,freq_2,peak_2,margin_2,limit_2,
judge_2
•••••
spur_n,freq_n,peak_n,margin_n,limit_n,judge_n
Parameter
spur_n
Spurious number
range_n
Segment number of the detected spurious
freq_n
Frequency of Spurious
Only one value is returned when Marker Result
Type is Worst.
Values have no suffix code, are in Hz units, and
have 0.01 Hz Resolution.
*** is returned when an error occurs/no
measurement is performed.
peak_n
Absolute power of Spurious
Only one value is returned when Marker Result
Type is Worst.
Values have no suffix code, are in dBm units,
and have 0.01 dB Resolution.
*** is returned when an error occurs/no
measurement is performed.
margin_n
Relative power from the limit line of Spurious
Only one value is returned when Marker Result
Type is Worst.
Values have no suffix code, are in dB units, and
have 0.01 dB Resolution.
*** is returned when an error occurs/no
measurement is performed.