Chapter
４
Native Device Message Details
4-198
limit_n
Power value of the limit line of Spurious
Only one value is returned when Marker Result
Type is Worst.
Values have no suffix code, are in dBm units,
and have 0.01 dB Resolution.
*** is returned when an error occurs/no
measurement is performed.
judge_n
Limit line judges the detected spurious as Pass
or Fail.
0 is returned when judged as Pass, and 1 is
returned when judged as Fail.
judge
Pass/Fail judgment to the whole segment
0 is returned when judged as Pass, and 1 is
returned when Fail.
*** is returned when no measurement is
performed.
To Next Page
Loading...
