Anritsu MT9083 Series User Manual

Document No.: M-W3636AE-4.0
ANRITSU CORPORATION
MT9083 Series
ACCESS Master
Remote Control
Operation manual
Fourth Edition
•
For safety and warning information, please read this
manual before attempting to use the equipment.
•
Additional safety and warning information is provided
within the MT9083A2/B2/C2 ACCESS Master
Operation Manual. Please also refer
to this document
before using the equipment.
•
Keep this manual with the equipment.

Anritsu MT9083 Series Specifications

General

Brand	Anritsu
Model	MT9083 Series
Category	Remote Control
Language	English

Summary

Safety Symbols

Symbols Used in Manual

Describes safety symbols like DANGER, WARNING, and CAUTION used within the manual.

Safety Symbols Used on Equipment and in Manual

Explains graphical safety symbols found on equipment and in the manual, including prohibited, obligatory, and warning types.

Chapter 1 Overview

Chapter 2 Before Use

Preparing Equipment

Connecting Equipment

Setting Ethernet

Guides users on configuring the IP address, Netmask, Gateway, and SCPI port.

Chapter 3 Platform SCPI Commands

Star (IEEE 488.2) Subsystem Commands

Covers standard SCPI commands defined by IEEE 488.2, like *CLS, *ESE, *ESR?, and *RST.

System Subsystem Commands

Status Subsystem Commands

Instrument Subsystem Commands

Chapter 4 OTDR Commands

Command Summary

Root Level Commands

SOURce Subsystem Commands

Covers commands for controlling the OTDR's optical source parameters like wavelength and pulse width.

SENSE Subsystem Commands

Explains commands for querying and setting OTDR measurement parameters and analysis settings.

TRACE Subsystem Commands

Details commands for accessing trace analysis, trace data, and file storage.

DISPlay Subsystem Commands