Anritsu MT9083 Series - Topmenu Subsystem Commands; Topmenu:unit:catalog; Topmenu:unit:catalog:full; Topmenu:unit[:Select]

Chapter 3 Platform SCPI Commands
3-22
3.5 TOPMenu Subsystem Commands
3.5.1 TOPMenu:UNIT:CATalog?
Syntax:
TOPMenu:UNIT:CATalog?
Description:
Returns the list of Units installed on MT9083A2/B2/C2 that can be selected prior to
starting OTDR instrument
Parameters:
None
Response:
comma-separated list of string identifiers of all installed Units
Example:
TOPM:UNIT:CAT?
−>
MM, SM<END>
3.5.2 TOPMenu:UNIT:CATalog:FULL?
Syntax:
TOPMenu:UNIT:CATalog:FULL?
Description:
Returns the list of Units installed on MT9083A2/B2/C2 that can be selected prior to
starting OTDR instrument
Parameters:
None
Response:
Returns a list of string - number pairs. The string contains the name identifier of
the installed Units. The immediately following NR1-formatted number is its
associated logical unit number. All response data elements are comma separated.
Example:
TOPM:UNIT:CAT:FULL?
−>
MM, 1, SM, 2<END>
3.5.3 TOPMenu:UNIT[:SELect]
Syntax:
TOPMenu:UNIT:SELect<wsp><string_id>
Description:
Sets the specified Unit to be currently selected Unit
Parameters:
The string instrument identifier assigned by the TOPMenu subsystem for the Unit
to be selected as a string value
Response:
None
Example:
TOPM:UNIT:SEL SM
3.5.4 TOPMenu:UNIT[:SELect]?
Syntax:
TOPMenu:UNIT:SELect?
Description:
Returns the string value identifier of the currently selected Unit
Parameters:
None
Response:
Returns the string value identifier of the currently selected Unit
Example:
TOPM:UNIT:SEL?
−>
MM<END>