Anritsu MT9083 Series - Status:operation:bit#:Enable; Status:operation:bit#[:Event]; Status:operation:enable

Chapter 3 Platform SCPI Commands
3-12
3.3.5 STATus:OPERation:BIT#:ENABle?
Syntax:
STATus:OPERation:BIT<n>:ENABle?
Description:
Returns the operation enable mask for the event register specified bit.
The value of <n> is restricted from 8 to 12 and represents bits 8 through 12
Parameters:
None
Response:
The bit value for the operation enable mask as a short value (0 .. 1)
Example:
STAT:OPER:BIT9:ENAB?
−>
0<END>
3.3.6 STATus:OPERation:BIT#[:EVENt]?
Syntax:
STATus:OPERation:BIT<n>[:EVENt]?
Description:
Queries the operation event register specified bit.
The value of <n> is restricted from 8 to 12 and represents bits 8 through 12
Parameters:
None
Response:
The bit value for the operation event register as a short value (0 .. 1)
Example:
STAT:OPER:BIT10:EVEN?
−>
0<END>
3.3.7 STATus:OPERation:ENABle
Syntax:
STATus:OPERation:ENABle<wsp><value>
Description:
Sets the operation enable mask for the event register.
Parameters:
The bit value for the operation enable mask as a short value (0 .. +32767)
Response:
None
Example:
STAT:OPER:ENAB 128
3.3.8 STATus:OPERation:ENABle?
Syntax:
STATus:OPERation:ENABle?
Description:
Returns the operation enable mask for the event register.
Parameters:
None
Response:
The bit value for the operation enable mask as a short value (0 .. +32767)
Example:
STAT:OPER:ENAB?
−>
128<END>