Anritsu MT9083 Series - Status:operation:instrument:condition; Status:operation:instrument:enable; Status:operation:instrument[:Event]

3.3 Status Subsystem Commands
3-13
3
Platform SCPI Commands
3.3.9 STATus:OPERation:INSTrument:CONDition?
Syntax:
STATus:OPERation:INSTrument:CONDition?
Description:
Queries the instrument operation condition register.
Parameters:
None
Response:
The bit value for the operation condition register as a short value (0 .. +32767)
Example:
STAT:OPER:INST:COND?
−>
16<END>
3.3.10 STATus:OPERation:INSTrument:ENABle
Syntax:
STATus:OPERation:INSTrument:ENABle<wsp><value>
Description:
Sets the instrument operation enable mask for the event register.
Parameters:
The bit value for the operation enable mask as a short value (0 .. +32767)
Response:
None
Example:
STAT:OPER:INST:ENAB 128
3.3.11 STATus:OPERation:INSTrument:ENABle?
Syntax:
STATus:OPERation:INSTrument:ENABle?
Description:
Returns the instrument operation enable mask for the event register.
Parameters:
None
Response:
The bit value for the operation enable mask as a short value (0 .. +32767)
Example:
STAT:OPER:INST:ENAB?
−>
128<END>
3.3.12 STATus:OPERation:INSTrument[:EVENt]?
Syntax:
STATus:OPERation:INSTrument[:EVENt]?
Description:
Queries the instrument operation event register.
Parameters:
None
Response:
The bit value for the operation event register as a short value (0 .. +32767)
Example:
STAT:OPER:INST?
−>
0<END>