EasyManua.ls Logo

Anritsu MT9083 Series - Page 57

Anritsu MT9083 Series
90 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.1 Command Summary
4-5
4
OTDR Commands
SENSe:TRACe:READy? - Queries if the trace data is ready.
SENSe:CONCheck - Sets connection check option ON or OFF.
SENSe:CONCheck? - Queries if the connection check option enabled.
SENSe:LIVCheck - Sets live fiber check option ON or OFF.
SENSe:LIVCheck? - Queries if the live fiber check option enabled.
SENSe:FIBer:IOR - Sets fiber IOR value.
SENSe:FIBer:IOR? - Queries fiber IOR value.
SENSe:FIBer:BSC - Sets fiber BSC value.
SENSe:FIBer:BSC? - Queries fiber BSC value.
SENSe:HOFFset - Sets horizontal offset value.
SENSe:HOFFset? - Queries horizontal offset value.
SENSe:VOFFset - Sets vertical offset value.
SENSe:VOFFset? - Queries vertical offset value.
SENSe:LSALeft - Sets left LSA maker position values.
SENSe:LSALeft? - Queries left LSA maker position values.
SENSe:LSARight - Sets right LSA maker position values.
SENSe:LSARight? - Queries right LSA maker values.
SENSe:ACURsor - Sets A cursor position.
SENSe:ACURsor? - Queries A cursor position value.
SENSe:BCURsor - Sets B cursor position.
SENSe:BCURsor? - Queries B cursor position value.
SENSe:LOSS:MODE - Sets current loss mode.
SENSe:LOSS:MODE? - Queries currently selected loss mode.
SENSe:ORL:MODE – Sets current ORL Mode.
SENSe:ORL:MODE? – Queries current ORL Mode.
SENSe:ANALyze:PARameters - Sets trace analysis parameters values.
SENSe:ANALyze:PARameters? - Queries trace analysis parameters values.
SENSe:ANALyze:AUTO - Sets trace auto analysis option ON/OFF.
SENSe:ANALyze:AUTO? - Queries if the trace auto analysis option is on.
Trace Subsystem Commands
TRACe:PARameters? - Queries trace parameters summary in text format.
TRACe:ANALyze - Sets trace to be analyzed.
TRACe:ANALyze? - Queries if the trace is analyzed.
TRACe:ANALyze:ORL - Performs ORL calculations on the trace.
TRACe:MDLOss? - Queries trace loss value for current loss mode.
TRACe:EELOss? - Queries trace end-to-end loss value.
TRACe:LOAD:SOR? - Queries trace data in SOR file format.
TRACe:LOAD:TEXT? - Queries trace data in ASCII text format.
TRACe:LOAD:DATA? - Queries trace data points in binary format.
TRACe:HEADer - Sets Trace Header.
TRACe:HEADer? - Queries Trace Header.
TRACe:LOADSTORe:SOR - Stores the SOR file in internal memory of MT9083.

Table of Contents