Anslut 025966 - Product Overview and Specifications; Key Features and Description; Technical Data; Product Components and Symbols

EN
35
solution if the system cannot be stopped
and there are faults that cannot be
rectied immediately. Notify the system
owner of any such temporary solutions.
• Safety checks before starting should
include checking that:
– The condensers are discharged
(discharge with safe, non-sparking
method).
– No live parts or wires are exposed
during lling, emptying or spooling
of the system.
– The earthing is intact.
SYMBOLS
Read the instructions.
The product uses ammable
refrigerant.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage 230 V
~
50 Hz
Power 185 W
Dehumidifying capacity 12 l /24 h
Noise level <36 dB
Refrigerant R290
Protection rating IPX0
Tank volume 2 l
Cord length 1.5 m
Size W 25.5 x H 47 x D22 cm
DESCRIPTION
• Powerful dehumidier (up to 12 litres/day).
• Shows the current relative humidity.
• Automatic mode for automatic control of
relative humidity.
• 12 hour timer.
• Eective removal of dust and moisture
from the air.
• Energy-ecient, low energy consumption.
• Quiet fan with two speed settings.
• Automatic defrosting at low temperature.
• Automatic power o/restart.
• Electronic control.
• Continuous dehumidifying.
• Antibacterial lter.
• Continuous emptying of water tank
(volume 2 litres).
PARTS
1. Control panel
2. Air outlet
3. Wheels
4. Front cover
5. Digital display
6. Back cover
7. Connection for continuous emptying
8. Water tank
9. Air lter
10. Sight glass for water level
FIG. 19
CONTROL PANEL
1. Power switch
2. Mode
– Automatic mode
– Continuous dehumidifying
– Night reduction
3. Timer
4. Set target humidity
5. Fan speed
6. Childlock
FIG. 20