Need help?Do you have a question about the Antec SMARTPOWER 2.0 and is the answer not in the manual?
Details the innovative dual-fan design for noise reduction and cooling efficiency.
Explains PFC circuitry for EU models, conforming to EN61000-3-2 standard.
Describes the main power switch and soft on/off feature for normal operation.
Highlights the system for using only necessary cables to reduce clutter and improve airflow.
Provides step-by-step instructions for installing the new power supply into the computer case.
Details connecting the 24-pin, +12V, Molex, SATA, and PCI Express connectors.
Explains how to add spare Molex or SATA connectors to existing cables.
Provides contact information for Antec, Inc. and Antec Europe B.V.
Lists contact methods for technical support in the US, Canada, and Europe.
General| Series | SMARTPOWER 2.0 |
|---|---|
| Wattage | 500W |
| Maximum Power | 500W |
| Form Factor | ATX |
| Modularity | Non-Modular |
| Cooling | 120mm Fan |
| Input Voltage | 100-240V |
| Input Frequency Range | 50-60 Hz |
| Output +12V | 36A |
| Protection | OVP, OCP, SCP, UVP |
To Next Page
