Antelope PURE 2 - Technical Specifications

Pure2 User Manual 33
is worldwide known. Elsewhere in this document where the trade name Antelope Audio is
used shall refer to Elektrosfera ltd., with address of management: Tsarigradsko Shose
Blvd., 7th km, Building of BIC IZOT, floor 6, Mladost region, Sofia, Bulgaria.
If any term hereunder is held to be illegal or unenforceable, it shall be severed from this
warranty and the legality or enforce ability of the remaining terms shall not be affected.
TECHNICAL SPECIFICATIONS
Analog Inputs:
1 x Combo Balanced Analog (XLR / ¼ TRS)
factory calibrated to +22dBu
Digital Inputs:
1 x AES/EBU on XLR (32kHz to 192kHz) @
110 Ohms terminated
1 x S/PDIF on RCA (32kHz to 192kHz) @ 75
Ohms terminated
1 x TOSLINK on optical fiber: up to 96kHz
Analog
Outputs:
1 x Stereo pair of Balanced XLR Outputs
from D/A Converter (Main Output) is factory
calibrated to 22dBu and user adjustable
from 8dBu to 26dBu
1 x Stereo pair Balanced Outputs for
monitors (2 x ¼ TRS)
1 x Balanced ¼ TRS LFE Out
1 x ¼ TRS Front Headphones 22dBu