I.
Introduction
Thank you for
choosing the
smartLAB®
bike2
smart
GPS
bike computer with ANT+ & Bluetooth.
This product is a bike
computer with a highly sensitive GPS module that is
integrated with multiple positioning solutions (GPS & BDS),
provides
fast and accurate positioning and
receives
speed
and route information.
The device has a large 2.3 inch LCD display with anti-
glare protection, which automatically switches the
backlight
on/off
by detecting the brightness
intensity from
the environment.
It can work with various accessories, simultaneous
connection of multiple sensor devices via ANT+ or
Bluetooth, such as heart rate monitor, power meter,
cadence and speed sensor.
It is compatible with various bike
mounts
and locking
systems and can be quickly installed
and uninstalled.
This manual contains important safety and usage
information. In addition, it provides
step-by-step
instructions on how to use the product. Please read this
manual thoroughly and keep it in a safe place in case you
need it again in the future.
IMPORTANT
: This product will not
pair
like the usual
standard
Bluetooth devices. You need an app to
see the
data. If the app supports these devices,
you can see the
values without pairing in the app.
To Next Page
Loading...