ANT+ smartLAB bike2 - Adjusting Wheel Circumference

16
6. Adjusting the wheel circumference
• Press and hold to enter the setting mode.
• There are 5 setting pages available (P1 ~ P5),
press the to switch to P2;
• Press to select the input;
• Press to select the setting digit, press the to
set the numbers;
• Pressto save and exit ( auto exit in 6 seconds
if no action is detected).
Press
Save and
return
(end automatically
if
no operation is
detected within 6
seconds).
Select the digit (The
selected
digit
flashes)
Set the number