ANT+ smartLAB bike2 - Time Zone Setting

18
,
7. Time zone setting
• Press and hold to enter the setting mode.
• There are 5 setting pages available (P1 ~ P5),
press the to switch to P3;
• Press to select the input (default
time zone: UTC/GMT + 08:00);
• Press Press to select the setting digit, press to
select.
Press the button to set the numbers;
• Pressto save and exit ( auto exit in 6 seconds
if no action is detected).
Press
Save and return
(end automatically
if no operation is
detected within 6
seconds).
Select the digit (The
selected digit
flashes)
Set the number