NOTE
The Bluetooth communication of the product does not work like the
standard Bluetooth. You need to use the smartLAB ride app
to get the
data from the smartLAB bike2.
For Android devices, it is from Android version 6.0 to turn on the GPS /
location determination to
ensure
smooth communication with
Bluetooth.
Since most customers
view
Strava for viewing ridden
routes, we
limited
the app's function to
forwarding data to Strava.
Since most customers
view
Strava for viewing ridden
routes, we
limited
the app's function to
forwarding data to Strava.
We will also
implement
connections to other
systems
according
to customer feedback.
The app is very easy to use. Call up the app. Blue tooth must be
switched on. Select
Bluetooth transmission on
the bike
computer
.
You will immediately see on the app that the device has been
connected. Here the app transfers all existing data on the bike
computer.
You will see a dot next to the date and time. If the dot is green, the
data for this route has been completely downloaded.
To send data to Strava, you need to
log in
to Strava once.
You can
do this via the Strava icons in the top right corner.
Then you can choose which route you
want to
send to Strava.
Click here on the arrow up.
You can then disconnect the connection by
clicking
on
Disconnect or
you can switch
off
the Bluetooth connection on the cycle
computer.
To Next Page
Loading...