EasyManua.ls Logo

Antunes HEBT-3V - User Manual

Antunes HEBT-3V
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HEBT-3V BUN TOASTER
1
P/N 1011328 Rev. I 04/18
McDonald’s
BUN TOASTER
HEBT-3V
MFG. NO. 9210858, 9210864, 9210865
Place this manual in the Toaster section
of your Equipment Manual.
Manufactured exclusively for
McDONALD’S
®
BY
ANTUNES
180 KEHOE BLVD.
CAROL STREAM, ILLINOIS 60188, U.S.A.
PHONE: +1-630-784-1000
TOLL FREE: +1-877-392-7854
FAX: +1-630-784-1650
www.antunes.com
TABLE OF CONTENTS
This manual is for the exclusive use of licensees and employees of McDonald’s Systems, Inc..
© McDonald’s Corporation All Rights Reserved
Owner Information .....................................................2
General ......................................................................2
Service/Technical Assistance ....................................2
Warranty Information .................................................2
Specifications .............................................................3
Electrical Specifications & Plug Configuration ..........3
Dimensions ................................................................3
Important Safety Information ....................................4
Installation ...................................................................5
Unpacking ..................................................................5
Location .....................................................................5
Operation .....................................................................6
Operating Instructions ...............................................6
User Mode .................................................................6
Manager Mode ..........................................................6
Safety Features .........................................................7
Operation .....................................................................7
Maintenance ................................................................ 8
Daily Cleaning ...........................................................8
Quarterly ..................................................................11
Clean Cooling Fans and Electrical Housings
(Annually) ................................................................13
Troubleshooting .......................................................14
Replacement Parts ...................................................17
Wiring Diagram .........................................................24
Notes..........................................................................25
Scan with mobile device or enter URL
for product and service information.
A.J. Antunes & Co.
HEBT-3V
http://tiny.cc/ajaHEBT3V
LIMITED WARRANTY
A.J. Antunes & Co. provides the following limited warranty to the original purchaser of all McDonald’s Equipment.
All components are warranted against defects in the material and workmanship for a period of two (2) years. If any part becomes inoperable during the period of this
warranty, A.J. Antunes & Co. will pay labor costs to an Authorized Service Agent to replace the part plus travel expenses.
A.J. Antunes & Co. reserves the right to make changes in design or add improvements on any products. The right is always reserved to modify Equipment because of
factors beyond our control and government regulation. Changes to Equipment do not constitute a warranty charge.
This warranty is exclusive and is in lieu of all other warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular pur-
pose, each of which is expressly disclaimed. The remedies described above are exclusive, and in no event shall A.J. Antunes & Co. or any of its Divisions be liable for
special consequential or incidental damages for the breach or delay in the performance of this warranty.
WARRANTY EXCLUSIONS
The cost of installation.
Equipment that has been damaged due to shipment. Purchaser should make
damage claim directly upon carrier.
Alteration, misuse, abuse.
Improper storage or handling.
Improper maintenance.
Failure to follow proper installation instructions, including electrical connec-
tion.
Improper or unauthorized repairs.
Scheduled Maintenance procedures as outlined in your MRC Card.
Consumables such as Grill Covers (Release Sheets), gaskets, Conveyor Belt
Wraps, O-rings, removal of links, and light bulbs.
Freight, foreign, excise, municipal, or other sales or use taxes.
Consequential damages such as loss of profit, loss of time, the cost of repair-
ing or replacing other property which is damaged, or any other incidental
damage of any kind.

Questions and Answers

  • D
    Debbie AndersonSep 10, 2025
    How to fix Antunes Commercial Food Equipment when Control Display flashes Err 13 and buns don't toast properly?
    • L
      larrymichaelSep 12, 2025
      If the Antunes Commercial Food Equipment Control Display flashes Err 13 and the buns are not toasting correctly, this may be due to a loose A Platen Thermocouple connection on the Control Board, or the Front Platen Thermocouple is open. Try re-securing the A Platen Thermocouple to the Control Board. If the Control Display still reads Err 13, check the front Thermocouple for continuity.
  • S
    Sheila AllenAug 23, 2025
    What to do if Antunes HEBT-3V flashes Err 14?
    • D
      Denise BensonAug 23, 2025
      If the Antunes Toaster control display flashes Err 14 and the buns aren't toasting properly, it might be because the B Platen temperature hasn't reached the setpoint in 20 minutes, or there's a failed Rear Platen Thermocouple, or a failed Control Board. Begin by letting the unit warm up for 30 minutes before checking again. If the display continues to show Err 14, it is recommended to contact your maintenance person or Authorized Service Agency for service.
  • T
    Tanya NealAug 25, 2025
    Why Antunes Toaster burns buns and flashes Err 19?
    • N
      nguyenbrittanyAug 25, 2025
      If your Antunes Toaster is burning buns and the control display is flashing Err 19, it could be due to a failed A Platen Solid State Relay, a failed Control Board, or a failed A Platen Thermocouple. It is recommended to contact your maintenance person or Authorized Service Agency for service.
  • A
    amy37Aug 26, 2025
    How to fix Antunes HEBT-3V Toaster flashing Err 9?
    • J
      John JohnsonAug 26, 2025
      If the control display of your Antunes Toaster is flashing Err 9 continuously, it indicates that the control compartment's ambient temperature is above 150° F (66° C), a failed Cooling Fan, or a failed Control Board. Ensure that the side vents on the toaster are not blocked and are not near other heating appliances. If the problem continues, it is recommended to contact your maintenance person or Authorized Service Agency for service.
  • J
    jasonaustinAug 28, 2025
    Why Antunes HEBT-3V Toaster burns buns and flashes Err 18?
    • H
      haleyboydAug 28, 2025
      If your Antunes Toaster is burning buns and the control display flashes Err 18 continuously, the cause may be a failed B Platen Solid State Relay, a failed Control Board, or a failed B Platen Thermocouple. It is recommended to contact your maintenance person or Authorized Service Agency for service.
  • C
    Christopher CruzAug 29, 2025
    What does Err 13 mean on Antunes Toaster?
    • C
      Catherine SmithAug 29, 2025
      If the Antunes Toaster control display flashes Err 13 and the buns aren't toasting properly, it could mean there's a loose A Platen Thermocouple connection on the Control Board or the Front Platen Thermocouple is open, or a failed Control Board. Try re-securing the A Platen Thermocouple to the Control Board. If the Control Display still reads Err 13, check the front Thermocouple for continuity. If the issue persists, it is recommended to contact your maintenance person or Authorized Service Agency for service.
  • L
    Lisa BentleySep 18, 2025
    What to do if Antunes Commercial Food Equipment flashes Err 10 continuously and buns are not toasting?
    • M
      Matthew McphersonSep 18, 2025
      If the Antunes Commercial Food Equipment flashes Err 10 continuously and buns are not toasting, it could be caused by a shorted B Platen Thermocouple to ground. Try re-securing the B Platen Thermocouple connection to the Control Board. If the Control Display still reads Err 10, check the Rear Thermocouple for continuity.
  • S
    Stacy HarveySep 12, 2025
    What does it mean when my Antunes Commercial Food Equipment flashes Err 11 and buns are not toasting properly?
    • B
      Barbara ChaseSep 12, 2025
      When the Antunes Commercial Food Equipment flashes Err 11 and the buns are not toasting properly, it suggests a loose B Platen Thermocouple connection on the Control Board, or the Rear Platen thermocouple is open. Try re-securing the B Platen Thermocouple connection to the Control Board. If the Control Display continues to show Err 11, check the Rear Thermocouple for continuity.
  • J
    Jonathan JohnsonSep 8, 2025
    What to do if the Antunes Commercial Food Equipment is displaying Err 14 and buns are not toasting properly?
    • L
      Laura GarzaSep 8, 2025
      If the Antunes Commercial Food Equipment displays Err 14 and the buns aren't toasting correctly, it could be because the B Platen temperature hasn't reached the setpoint within 20 minutes. Allow the unit to warm up for 30 minutes and then recheck. Another possibility is a failed Rear Platen Thermocouple.
  • B
    Brandi NguyenSep 5, 2025
    What to do if the Antunes Commercial Food Equipment Control Display flashes Err 9 continuously?
    • S
      seth38Sep 5, 2025
      If the Antunes Commercial Food Equipment Control Display flashes Err 9 continuously, it indicates that the control compartment ambient temperature is above 150° F (66° C). Ensure that the side vents on the toaster are unblocked and not near other heating appliances. If the problem persists, it could be due to a failed cooling fan or control board.

Summary

Owner Information

General Information

Provides safety, installation, and operating procedures for the unit.

Service and Technical Assistance

Contact Antunes Technical Service for assistance with installation or operation issues.

Warranty Information Overview

Directs users to the full text of the Limited Warranty within the manual.

Specifications

Electrical Specifications and Plug Configuration

Details electrical requirements and plug types for different models of the toaster.

Physical Dimensions

Provides the external dimensions of the HEBT-3V toaster in inches and millimeters.

Important Safety Information

General Safe Operation Guidelines

Key safety precautions to follow during equipment use and installation.

Electrical Safety Warnings

Crucial warnings regarding electrical shock hazards and grounding requirements.

Installation

Unpacking Procedures

Instructions for carefully unpacking the toaster and its accessories.

Toaster Placement Guidelines

Recommendations for locating the toaster and connecting its power cord.

Operation

Basic Operating Instructions

Step-by-step guide for starting and using the HEBT-3V toaster for the first time.

User Mode Functionality

How to view toaster settings (temperatures, motor speed) without making changes.

Manager Mode Functionality

Accessing and adjusting operational settings like temperature and motor speed.

Maintenance

Daily Cleaning Procedures

Detailed steps for performing daily cleaning of the toaster and its conveyor belts.

Troubleshooting

Error Code Diagnostics

Troubleshooting common error codes displayed on the unit and their solutions.

Replacement Parts

External Parts Diagram

Exploded view of major external components with part identification.

Wiring Diagram

Antunes HEBT-3V Specifications

General IconGeneral
ManufacturerAntunes
ModelHEBT-3V
Voltage208-240V
ConstructionStainless Steel
Phase1 Phase
Wattage3000 W
Toast Capacity300 slices/hour
TypeConveyor Toaster

Related product manuals