Packing List
Product introduction
DC Power
RJ45
USB Flash
Drive Port
Fingerprint
Sensor
2.8”TFT
Screen
Touch
Keypad
Card Reader
Area
Delete Or Cancel Button
Device Menu Setup
CX2 Terminal
Mounting Bracket
Screw*4
DC 12V Power Adapter
RFID Cards X 2
Before Starting
Hardware Safety Instructions
Observe the following instructions to use the product safely and prevent any
risk of injury or property damage.
Do not use oily water or sharp objects to stain or damage the display screen.
Fragile parts are used in the equipment, please avoid operations such as falling,
crashing, bending or heavily pressing.
The optimal working environment of CX2 is indoor. The device function fully
under temperature: -10°C~50°C (14°F~122°F), The best performance is between:
15°C~32°C (59°F~89.6°F). The device will be less effective if exceeds these ranges.
Please gently wipe the screen and panel with soft materials. Avoid scrubbing
with water or detergent.
The recommended power of CX2 terminal is DC 12V ~ 1A. The device will
function less effective in case the power supply cable extends too long.
ANVIZ Terms & Policies
Before using all ANVIZ products, please read all applicable terms rules, policies
and usage provisions found at www.anviz.com/privacypolicy and
www.anviz.com/anviz-biometric-data-retention-policy.
By using your ANVIZ products, you agree to be bound by the ANVIZ Terms &
Policies.
1
To Next Page
Loading...
Need help?
General
