Need help?Do you have a question about the Anviz EP10 and is the answer not in the manual?
General| Model | EP10 |
|---|---|
| Type | IP Access Controller |
| Power Supply | 12V DC |
| User Capacity | 10, 000 |
| Event Capacity | 100, 000 |
| Fingerprint Capacity | 10, 000 |
| Logs Capacity | 100, 000 |
| Relay | 1 Relay Output |
| Certifications | CE, FCC |
| Communication | TCP/IP |
| CPU | 32-bit |
| Fingerprint Sensor | Optical |
| Identification Mode | Fingerprint, Card, Password |
| Card Reader | EM |
| Alarm | Yes |
| Verification Speed | < 1s |
| Humidity | 20% to 80% |
| Access Control Interface | RS485 |
To Next Page
