Anviz EP10 User Manual

User ▼
Enroll
Delete
fVerify Mode
Press [OK] key to enter the setting interface:
Verify Mode ▼
f008101 ANY
Esc-C Set-OK
Press [→] key to select employee or press [OK] to input user ID:
or
Verify Mode ▼
f008101 ANY
Esc-ESC Set-OK
Verify Mode
ID 000001
After input user ID, press [OK] to enter setting interface.
Verify Mode
008101 iiiANY
Yes-OK
Setting staff’s verify mode through [←] or [→] key, and press [OK] key to confirm
and enter save interface:
Verify Mode
008101 PW+FP
Cancel-C Sav-OK
Then press [OK] key to save this setting; Press [C] key to cancel this operation.
2.3.4 Admin Setup
To prevent illegal managers, we need to set device manager who should be
identified to enter menu and do operation.
10

Anviz EP10 Specifications

General

Brand	Anviz
Model	EP10
Category	IP Access Controllers
Language	English