Log Setup
fLog Alert 3000
fRe-Verify 30
Press [←] or [→] key or number keypad to input time. Press [OK] key to confirm.
Then press [C] to save the setting.
Prompt: if the same finger is identified continuously in re-verify time period, only the
first record will be saved in device memory.
2.4.11 Hardware Test
Test the functions of machine keys, LCD, voice, scanner and data area.
In [Setup] menu, select [Hardware Test] option,
Setup
System
Log Setup
fHardware Test
Press [OK] to enter setting interface as following:
Hardware Test ▼
fKeypad
LCD
Voice
Press [←] or [→] key to choose testing option and press [OK] key to start.
Keypad: Select [Keypad] option, and press [OK] to enter keypad testing interface.
Then press any key to start keys testing (i.e. press key 3, if interface shows current key
as 3, it indicates the key 3 works).
Keypad
Current key
_
3_
Esc-C
LCD: press [←] or [→] key to select [LCD] option, and press [OK] to enter LCD
testing interface.
22
To Next Page
Loading...
