In T&A status, input employee ID through number keypad, i.e. 8108.
Pass Verify
ID 8108
Press [OK] key to confirm ID, and input password following prompt,
Input employee password and press [OK] key to confirm. If verification passes,
green LED indicator will be on with voice prompt ‘Access granted’. Else red LED
indicator will be on with voice prompt ‘Access denied’.
ID+FP mode
In T&A status, input employee ID, i.e. 8102
Pass Verify
ID 8102
Press [OK] key to confirm and place finger on sensor scanner. After a beep ‘di-’,
system will prompt as following,
FP Verify
Take off !
Remove your finger. If access granted, green LED indicator will be on with voice
prompt ‘Access granted’. Else red LED indicator will be on with voice prompt ‘Access
denied’.
2.9 Shut down
In time attendance status, keep pressing [OK] key until interface shows as
following,
29
To Next Page
Loading...
Need help?
General
