Click the [Basic Parameter Setting]. The [Basic Parameter Setting] pops up:
Com port Communication delay time (1-5) sec.: The default time is 3s.
Network Communication delay time (1-20) sec.: The default time is 5s.
□ Communication failed, automatically exit current operation: If timeout is larger
than ‘Communication delay time’, software will automatically exit.
□ In Realtime Monitoring, voice prompts “Department name”: During real-time
monitor, if employee is access granted, the software will voice prompt employee
department and name.
□ Clear the data after downloading: After downloading records completed, delete
the record downloaded from machine automatically.
Click the button [OK] to save the setting.
5.5.2 T&A Status setting
Click the [T&A status setting] option, and the [T&A status setting] window pops up:
Click the state which is going to be modified. Input the status description.
[Retrieve from the selected terminal]: Download the T&A status from the selected
97
To Next Page
Loading...
Need help?
General
