Need help?Do you have a question about the Anviz W 1 and is the answer not in the manual?
General| Model | W1 |
|---|---|
| Access Control Type | IP Access Controller |
| CPU | 32-bit |
| Card Reader | Yes |
| Logs Capacity | 100, 000 |
| Event Capacity | 100, 000 |
| Relay | Yes |
| Alarm Output | Yes |
| Exit Button | Yes |
| Door Sensor | Yes |
| Tamper Alarm | Yes |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to 50°C |
| Fingerprint Capacity | 3, 000 |
| Weight | 500g |
| Fingerprint Sensor | Optical |
| Communication | TCP/IP |
| Identification Mode | Fingerprint, Card, PIN |
| Humidity | 20% to 80% |
| Supported Cards | EM |
Lists the contents included in the product package for W1 and W2 devices.
Instructions for physically mounting the W1 or W2 device onto a wall.
Explains the Wiegand 26 data output for card and fingerprint users.
Instructions for powering on the device and logging into the admin menu.
Steps to add new users, including fingerprint enrollment.
Guide on using the keypad for character input and special symbols.
Details correct and incorrect methods for fingerprint scanning.
Instructions for configuring network settings and communication.
Steps to install the management software from the provided CD.
Instructions for connecting the device to a PC via Mini USB.
Instructions for connecting the device to a network using RJ45.
Steps to establish communication between the device and the CrossChex software.
Overview of key features and functions within the CrossChex management software.
To Next Page
