Anviz W 1 User Manual

- 6 -
0
Set
1. Turn on the Device
Plug in the power supply and wait for the device
boot up.
2. Add Users to Device
Scan the same finger three times to enroll the
fingerprint.
* RFID Card is the optional feature. If you have the card option and want to enroll the card, use the up & down key to move the cursor
to card number field. Swipe the card in the field of card module. The card number will be displayed.

Anviz W 1 Specifications

General

Brand	Anviz
Model	W 1
Category	IP Access Controllers
Language	English