Anybus Wireless Bolt Reference Guide

AT Commands 28 (88)
3.3.29 AT*BCLW Write an entry in the Connection list
AT*BCLW=
Writes an entry in the Connection list. NOTE: If store is set to 1 all entries in the connection list
will be stored.
Syntax:
AT*BCLW=<index>,<bd_addr>,<name>,<role>,<store>
Input Parameters:
Name
Type Description
index Integer The index of the entry to write.
bd_addr MACAddress If specified the MAC address of the remote Bluetooth device must
match this value.
name
String If name is specified and S register 2017 is 1 the remote name must
match this value exactly. If S register 2017 is 0 this is a case
sensitive substring of the remote name to connect to, e.g. if
specified to DUT it will try to connect to DUT, DUTx, xDUT and
xDUTx, but not to dut.
role Integer The role of the remote device:
100: PAN User role, PAN Profile
101: Network Access Point role, PAN Profile
103: PAN, This will first try to connect to PANU, and if it fails,
connect to NAP, All others:Reserved
store Boolean If store is 1 the new value is stored permanently.
Example:
AT*BCLW=0,00026F668FA8,dut1,101,1<br>OK
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7

Anybus Wireless Bolt Specifications

General

Brand	Anybus
Model	Wireless Bolt
Category	Network Hardware
Language	English