Anybus Wireless Bolt - Connecting an Ethernet network to an existing WLAN

AT Commands 30 (88)
3.4 WLAN Commands
3.4.1 AT*WMODE WLAN Mode
AT*WMODE=
Set WLAN mode, Station or AP.
Syntax:
AT*WMODE=<mode>
Input Parameters:
Name
Type Description
mode Integer The mode to set, Station (0) or AP (1).
Requires a reboot for the changes to take effect.
Example:
Input: AT*WMODE=1 sets WLAN mode to AP.
AT*WMODE?
Get WLAN mode, Station (0) or AP (1)
Syntax:
AT*WMODE?
Example:
AT*WMODE?<br>*WMODE:<mode>
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7