Need help?Do you have a question about the Anybus Wireless Bolt and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11a/b/g/n |
|---|---|
| Frequency Bands | 2.4 GHz and 5 GHz |
| IP Rating | IP67 |
| Data Rate | Up to 150 Mbps |
| Communication Protocols | Modbus TCP, EtherNet/IP, PROFINET |
| Power Supply | 24 V DC |
| Ethernet Interface | 10/100 Mbps |
| Configuration | Web-based configuration |
| Security | WPA/WPA2, 802.1X |
| Range | Up to 100 meters (depending on environment) |
| Weight | 150 g |
| Certifications | CE, FCC |
| Product Type | Wireless Access Point |
Manual's purpose and how to find additional resources.
Records of manual revisions, including version, date, and description.
Explains symbols, formatting, and warnings used in the manual for clarity.
Overview of Anybus Wireless Bolt's function, applications, and limitations.
Guidance on choosing between Bluetooth and WLAN for specific use cases.
Explains product model naming conventions and designators for certifications.
Safety precautions related to RF energy, ESD, grounding, and personal injury.
General advice on installation, placement, and environmental considerations.
Details on mounting the unit, required hole size, and tightening torque.
Pinout and description of the 18-pin connector for the Wireless Bolt.
Instructions for making an Ethernet connector cable for the Anybus Wireless Bolt.
Overview of configuration methods, web interface access, and browser compatibility.
Details on accessing and using the web interface for unit configuration.
Explanation of Easy Config modes for quick and automated setup.
Configuration of IP assignment, subnet mask, gateway, and DHCP server.
Settings for operating the unit as a WLAN client.
Advanced WLAN bridging modes like Layer 2 tunnel and Layer 2 cloned MAC.
Settings for operating the unit as a WLAN access point.
General Bluetooth interface settings and operating modes (PANU, NAP).
Configuration for Bluetooth PANU (Client) mode for device connection.
Configuration for Bluetooth NAP (Access Point) mode for device hosting.
Procedure for updating the unit's firmware via the web interface.
Using AT commands for advanced configuration and parameter reading.
Settings for device name, password, reboot, and factory reset.
Methods to restore factory default settings for the unit.
Location and function of the reset button and recovery mode.
Connecting two Ethernet segments wirelessly using Easy Config.
Connecting PROFINET devices via Bluetooth using Easy Config.
Connecting EtherNet/IP devices via Bluetooth using Easy Config.
Connecting a wired network to an existing WLAN.
Connecting a single Ethernet device to a WLAN using MAC cloning.
Accessing a PLC via WLAN using the Wireless Bolt as an access point.
Explanation of Fresnel zones and their impact on wireless signal propagation.
Detailed technical specifications for the Anybus Wireless Bolt.
Radiation diagrams for the 2.4 GHz internal antenna.
To Next Page
