Anybus Wireless Bolt User Manual

Configuration 22 (36)
4.2.10 AT Commands
Fig. 15 AT Commands
AT commands can be used for setting advanced parameters that are not accessible in the web
interface, to read out parameters in text format, and for batch configuration using command
scripts.
Enter or paste the commands into the text box, then click on Send. The result codes will be
displayed below the text box.
See the AT Commands Reference Guide for a complete list of supported AT commands.
Anybus
®
Wireless Bolt
™
User Manual SCM-1202-007-EN 2.5

Anybus Wireless Bolt Specifications

General

Brand	Anybus
Model	Wireless Bolt
Category	Network Hardware
Language	English