Anybus Wireless Bolt - Bluetooth Low Energy Commands

AT Commands 60 (88)
3.9 Bluetooth Low Energy Commands
3.9.1 AT*BLEAD Get/Set the advertise data
AT*BLEAD=
Set the data to be advertised by this device.
Syntax:
AT*BLEAD=<data>,<store>
Input Parameters:
Name
Type Description
data String The new data to be advertised as a HEX string with max 28 bytes.
store
Boolean If store is 1 the new value is stored permanently.
Example:
AT*BLEAD=0102000305FF,1<br>OK
AT*BLEAD?
Get the data currently being advertised by this device.
Syntax:
AT*BLEAD?
Example:
AT*BLEAD?<br>*BLEAD:<data>
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7