Anybus Wireless Bolt Reference Guide

AT Commands 46 (88)
3.6.13 AT*WSCHL Channel list
AT*WSCHL=
Sets the Channel list for Station mode.
Syntax:
AT*WSCHL=<channel_list_str>,<store>
Input Parameters:
Name
Type Description
channel_list_str String A comma separated string of channels to use.
Valid channels are 1-11 for 2.4 GHz and 36, 40, 44, 48, 52, 56, 60,
64, 100, 104, 108, 112, 116, 132, 136, 140 for 5 GHz.
If world mode is disabled and configured as WLAN client also
channels 12, 13, 120, 124, 128 are possible.
store Boolean If store is 1 the new value is stored permanently.
Example:
AT*WSCHL=<channel0>,<channel1>,<channel2>...,1
AT*WSCHL?
Gets the Channel list for Station mode.
Syntax:
AT*WSCHL?
Example:
AT*WSCHL?<br>*WSCHL:<channel0>,<channel1>,<channel2>...
3.6.14 AT*WSCLC Clear the Connection list
AT*WSCLC=
Clears all the entries in the Connection list.
Syntax:
AT*WSCLC=<store>
Input Parameters:
Name
Type Description
store Boolean If store is 1 the new value is stored permanently.
Example:
AT*WSCLC=1
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7

Anybus Wireless Bolt Specifications

General

Brand	Anybus
Model	Wireless Bolt
Category	Network Hardware
Language	English