Anybus Wireless Bolt

AT Commands 66 (88)
3.9.7 AT*BLECM BLE connectability mode
AT*BLECM=
Set the BLE connectability mode.
Syntax:
AT*BLECM=<mode>,<store>
Input Parameters:
Name
Type Description
mode Integer The BLE connectability mode to set:
1: BLE non-connectable mode
2: BLE connectable mode
store Boolean If store is 1 the new value is stored permanently.
Example:
AT*BLECM=<mode>,<store><br>OK
AT*BLECM?
Get the current BLE connectability mode.
Syntax:
AT*BLECM?
Example:
AT*BLECM?<br>*BLECM:<mode><br>OK
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7