Anybus Wireless Bolt Startup Guide

Anybus
®
Wireless Bolt
™
Additional certification and compliance information
COMPLIANCE SHEET
This document does not include the complete instructions for the safe use of the described equipment.
Make sure that you have read and understood the safety instructions in the user documentation for the
described equipment before proceeding.
© 2018 HMS Industrial Networks AB SCM-1202-061 EN 1.0 / 2017-12-19 / 8666
UL Ordinary Locations (Ord.Loc.)
Anybus Wireless Bolt modules are certified for use in ordinary locations in compliance with the following
standards:
• UL 61010-1 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT,
CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS - Edition 3 - Revision
Date 2015/07/15
• UL 61010-2-201 STANDARD FOR SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR
MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-201: PARTICULAR
REQUIREMENTS FOR CONTROL EQUIPMENT - Edition 1 - Issue Date 2014/01/24
• CSA C22.2 NO. 61010-1-12 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR
MEASUREMENT, CONTROL, AND LABORATORY USE. PT. 1, GENERAL REQUIREMENTS -
Edition 3 - Revision Date 2015/07/01
• CSA C22.2 NO. 61010-2-201:14 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR
MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-201: PARTICULAR
REQUIREMENTS FOR CONTROL EQUIPMENT - Edition 1 - Issue Date 2014/01/01
The certification number of Anybus Wireless Bolt certified modules according to Ord.Loc. certification is:
• E214107
According to the standards listed above, Anybus Wireless Bolt modules are certified with the following
marking:
According to the standards listed above, the Anybus Wireless Bolt modules shall be supplied by a CLASS 2
/ SELV classified power supply.

Anybus Wireless Bolt Specifications

General

Brand	Anybus
Model	Wireless Bolt
Category	Network Hardware
Language	English