6
And in BT mode, when BT microphone is receiving signal, the
channel switch speed is slow, it is difficult to improve due to the
limitation of bluetooth communication.
4.8-
Select a Zone
Press the assigned
[VFO/MR]
key to switch the radio into channel
mode first.
Operation 1: Press the
or
key to change the zone.
Operation 2: Go to Menu Zone, select a zone from the zone list.
Operation 3: In Menu Setting Radio Set Key Func, assign a
key function to [Zone Select]. Press the assigned [Zone Select] key,
and input the zone number and confirm.
4.9-
Make a Call
Press and hold the
[PTT]
button to start a call at the current channel,
the left red indicator lights on and the radio is transmitting. Release
the
[PTT]
button to stop the transmitting.
4.10-
Receive a Call
When the radio receives a call, the right green indicator lights on and
the radio is receiving.
4.11-
Noise Reduction function
Enable the noise reduction function can reduce background noise
and ambient noise effectively, and make calls between users clearer.
Noise reduction works basing on the noise intensity, when the noise
is strong, noise reduction reduces more noise and the audio has
more distortion.
When the noise is slight, noise reduction reduces less noise and the
audio has less distortion, it may not noticeable for noise reduce.
And set the noise reduce level higher, the noise will be reduced
more and the audio has more distortion.
To Next Page
Loading...
Need help?
General
