EasyManuals Logo

AnyTone BT01 User Manual

AnyTone BT01
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
7
4.12-
Menu Operation
The menu operation on BT microphone is mapped from AT-
D578UV radio, the functions are fully same as AT-D578UV radio.
Bluetooth menu function as below.
BT Menu
Sub menu Description
BT
Pairing
-- Disconnects to the radio.
BT
Names
-- The BT name of BT01 microphone.
Paired
Names
--
The BT name of BT device connected to the AT-
D578UV radio.
BT Hold
Time
OFF
The BT01 microphone disconnects to the radio at
once when signal drops. It takes time to rebuild the
connection when new signal come in.
1-30S
The BT01 microphone stays connecting to the radio
within the set time after signal drops, after the set
time dispired, the BT device will disconnect to the
radio.It takes time to rebuild the connection when
new signal come in.
innite
The BT01 microphone stays connecting to the radio
after singal drops.It will pick up the signal at once
when new signal come in.
BT RX
Delay
30ms-5.5s
The radio will ignore the RX signal if the duration of
the signal does not exceed the set time. It helps to
prevent the interfere signal being heard.
You can set suitable noise reduce level to get acceptable noise and
audio effect.
Go to Menu Settings Radio Set Voice Func Noise
Reduce(RX), set the noise reduce level for receiving use,
recommend setting is level 3. Noise reduce for analog RX only.
Go to Menu Settings Radio Set Voice Func Noise
Reduce(TX), set the noise reduce level for transmit use,
recommend setting is level 3. Noise reduce for both analog TX and
digital TX.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AnyTone BT01 and is the answer not in the manual?

AnyTone BT01 Specifications

General IconGeneral
BrandAnyTone
ModelBT01
CategoryMicrophone
LanguageEnglish

Related product manuals