pg. 4
STEP 1
13.4"
1-1 Measure the distance A between the floor and the bottom of the shower column.
Measure the distance B between the bottom of the shower column and the back bracket.
Measure the distance C between the brackets at the back of the shower column body (1)
1-2 Project this measurement onto the wall in order to install the mounting brackets (2)
1-3 Mark the postion of each screw holes of both mounting brackets(2) on the wall using a pencil.
②
Tape
B
C
A
①
5"-16.5"
1-4 The recommended height of water is 5-16.5 inches.
Have questions? Call us at 305-614-4070 or visit us at www.ANZZI.com
To Next Page
Loading...
