pg. 6
STEP 3
INSTALLATION (HANDSHOWER)
Insert the shower holder through the pre-drilled hole on the shower panel.
Connect the water supply hose to the shower holder,as shown.
Make sure all washers are inserted to prevent leakage.
Once the shower panel is fully installed and hung on the bracket, you can install the hand
shower hose to the holder connection.
3-1
Connecting the hand shower to the hose, as shown.3-4
3-2
3-3
Have questions? Call us at 305-614-4070 or visit us at www.ANZZI.com
To Next Page
Loading...
