AOC AG352UCG

23
OSD Setup
1. Press MENU-button to display menu.
2. Press - or + to select (OSD Setup), and press MENU-button to enter.
3. Press - or + to select submenu, and press MENU-button to enter.
4. Press - or + to adjust.
5. Press Exit to exit.
OSD Setup
Language
Set OSD display language to
English.（English is default setting）
English, Français, Español,
Português, Deutsch,
Italiano,Nederlands,Svenska,
Suomi, Polski, Čeština,
Русский, 한국어, 繁体中文,
简体中文, 日本语
Timeout
Adjust the OSD timeout.
Each step will increase / decrease
value by 5
5-120
H. Position
Adjust the horizontal position of
the OSD. Each step will increase /
decrease value by 25
0-100
V. Position
Adjust the vertical position of the
OSD. Each step will increase /
decrease value by 5
0-100
Transparence
Adjust the OSD transparent each
step will increase/decrease value
by 25
0-100
Break Reminder
Break Reminder if the user
continually work for more than 1
hours
ON/OFF
Note：
1） If turn on, a time break reminder message is generated for each hour (1, 2, 3 ……24 hours, > 24 hours), the
message will be showed for 10 sec. Also, the message will disappear when press any function key.
2） The message location is at the default screen center position and cannot change via OSD.
3） When power on/off, DC on/off, or enter/exit power saving mode, the working time is to clear and recalculate.
4） OSD time out can save data.