To Next Page

To Previous Page

AOC International (Europe) B.V.

Prins Bernhardplein 200 / 6

floor, Amsterdam, The Netherlands

Tel: +31 (0)20 504 6962 • Fax: +31 (0)20 5046933

AOC PIXEL POLICY

ISO 9241-307 CLASS 1

July 25

, 2013

AOC strives to deliver the highest quality products. We use some of the industry’s most advanced manufacturing

processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT monitor panels

used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free

from pixel defects, but AOC guarantees that any monitor with an unacceptable number of defects will be repaired or

replaced under warranty. This Pixel Policy explains the different types of pixel defects and defines acceptable

defect levels for each type. In order to qualify for repair or replacement under warranty, the number of pixel defects

on a TFT monitor panel must exceed these acceptable levels.

Pixels and Sub Pixel Definition

A pixel, or picture element, is composed of three sub pixels in the primary colors of red, green and blue. When all

sub pixels of pixel are lit, the three colored sub pixel together appear as a single white pixel. When all are dark, the

three colored sub pixels together appear as a single black pixel.

Types of Pixel Defects

 Bright Dot Defects: the monitor displays a dark pattern, sub pixels or pixels are always lit or “on”

 Black Dot Defects: the monitor displays a light pattern, sub pixels or pixels are always dark or “off”.

ISO 9241-307

Pixel Defect Class

Defect Type

1Bright Pixel

Defect Type 2

Black Pixel

Defect Type 3

Bright Sub pixel

Defect Type 4

Black Sub pixel

Classe 1

AOC International (Europe) B.V.

Questions and Answers:

Need help?

Do you have a question about the AOC AG352UCG and is the answer not in the manual?

AOC AG352UCG Specifications

General