To Next Page

To Previous Page

Installation

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a

person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by

the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use

mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a re or electric

shock. Never spill liquids on the monitor.

Do not place the front of the product on the oor.

If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit

instructions.

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence

overheating may cause a re or damage to the monitor.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the

stand:

Installed with stand

12 inches

30cm

4 inches

10cm

4 inches

10cm

4 inches

10cm

Leave at lease this

space around the set

Questions and Answers:

Need help?

Do you have a question about the AOC C24G2 and is the answer not in the manual?

AOC C24G2 Specifications

General

Weight and Dimensions