AOC C32G2ZE - OSD Setting

12
OSD Setting
Basic and simple instruction on the control keys.
Luminance Color Setup Picture Boost OSD Setup Game Setting ExitExtra
Contrast 50
Brightness 90
Eco mode Standard
Gamma Gamma 1
DCR Off
HDR Mode Off
Luminance
1). Press the
MENU-button
to activate the OSD window.
2). Press
Left
or
Right
to navigate through the functions. Once the desired function is highlighted, press the
MENU-button
to activate it, press
Left
or
Right
to navigate through the sub-menu functions. Once the desired
function is highlighted, press
MENU-button
to activate it.
3). Press
Left
or to change the settings of the selected function. Press to exit. If you want to adjust any other
function, repeat steps 2-3.
4). OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is o󰀨 and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the MENU-button while the monitor is
o󰀨 and then press power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disable to adjust.
2). ECO modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one state
can exist.