7
3.3 OSD Setting
1) Press the MENU-button to activate the OSD window.
2) Press<or > to navigate through the functions. Once the desired function is highlighted, press the MENU-button
to activate it . press<or > to navigate through the sub-menu functions. Once the desired function is highlighted,
press MENU-button to activate it.
3) Press <or >to change the settings of the selected function. Press AUTO to exit. If you want to adjust any other
function, repeat steps 2-3.
4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is
off and then press power button to turn the monitor on.
Notes:
1) If the product has only one signal input, the item of "Input Select" is disable to adjust.
2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to
adjust.
3) One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
