Service Manual AOCi2252VW
14
3. Panel Feature
LM215WF3 is a Color Active Matrix Liquid Crystal Display with a Light Emitting Diode ( White LED) backlight system
without LED driver. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display
operating in the normally black mode. It has a 21.5 inch diagonally measured active display area with FHD resolution
(1080 vertical by 1920horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are
arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal
for each dot,thus, presenting a palette of more than 16,7M colors with A-FRC (Advanced Frame Rate Control).
It has been designed to apply the 8Bit 2 port LVDS interface. I t is intended to suppor t di splays where high br ightness,
super wide viewing angle, high color saturation, and high color are important.
3.1 General Specifications
3.2 Electrical Absolute Ratings
To Next Page
Loading...
