12
TV INSTALLATION Connect the device
Rear connections
For 26”/32”/42” model:
Port Functions
1
Tuner Input
Connects to TV RF signals (antenna/CATV).
2
SCART
(EXT 1 / EXT 2)
EXT 1: Full SCART, which transmits RGB, S-Video and CVBS in and
monitor out.
EXT 2: Half SCART, which transmits S-Video or CVBS in and monitor out.
3
PC IN
Connect to VGA analog signals sources. PC audio supports 3.5mm Jack.
4
SPDIF Output
(Digital audio out)
(optional)
SPDIF is highly recommended for high quality digital sound output.
5
Component Video
and L/R Audio Input
The YPbPr video signal can be used if connecting through the component
video port. For example Progressive Scan DVD payers, Hi-scale HDTV
Decoders, and satellite receivers, obtain video with maximum resolution
using YPbPr and L/R audio signals.
6
HDMI 1 / HDMI 2
High Definition Multimedia Interface
Connect to devices with digital signals and can be used with PC or HDTV
video signals.
To Next Page
Loading...
Need help?
General
