23
TV menu Using the advanced menu
TV/Channels
Menu Descriptions
Channels
Channel scan
Channel Scan will re-tune the television automatically. It is recommended to run
the Channel Scan periodically to ensure that all new services are added.
Update scan
Search the new channels automatically that are not in the channel list.
Single RF Scan (Digital Only)
Enter the Single RF Scan in the Channels submenu to scan digital channels.
Analog Manual Scan
The television can be tuned-in manually using Analog Manual Scan. Use the
number keys to enter the Start Frequency to scan up or scan down.
Channel skip
To prevent certain programs from being viewed by pressing CH + / - buttons
on the remote control, the program position can be skipped.
Tip: The skipped program may not be found by pressing CH + / - buttons but
can be access by pressing number buttons directly.
Channel sort
Change the order of the Channel List.
Channel Edit
Enter the Channel Edit in the channels submenu to edit the channel number
and channel name by using the number buttons 0~9.
Note: The following RC number-mapping table will not be shown on the TV
screen.
Decoder (Analog only)
Channel Decode support the Canal+ (paid television channel); however, the
channel also broadcast some un-encrypted programs. These programs without
encryption can be viewed free of charge.
Analog CH Fine Tune
Select Analog CH Fine Tune in the Channels submenu to adjust the frequency.
To Next Page
Loading...