6
PREPARATION
Before installation
1. Place the TV on a solid surface.
‧ Ensure that the TV is placed in a position to allow free flow of air.
‧ Do not cover the ventilation openings on the back cover.
‧ To prevent any unsafe situations, no naked flame sources, such as lighted candles, should
be placed on or in the vicinity.
‧ Avoid heat, direct sunlight and exposure to rain or water.
‧ The equipment shall not be exposed to dripping or splashing.
2. Insert the aerial plug firmly into the aerial socket
ANT IN 75Ω at the back of the TV.
For 19”/22” model: For 26”/32”/42” model:
Cable
Cable
To Next Page
Loading...