Buttons located at the right side of the TV will operate the same as these buttons on the remote control.
T V
HDMI
PC
USB
Back
V O L C H
Source
Mute
Display
Sleep
Zoom Menu
Freeze Picture Audio
MTS
Ypbpr
AV
Button Description
POWER
Press to turn on and off the TV. The TV will never completely power off
unless it is physically unplugged.
TV Press to choose TV source mode.
Ypbpr
AV
AV/Ypbpr Press repeatedly to choose AV or YPbPr source mode.
HDMI/PC Press repeatedly to choose HDMI or PC source mode.
USB Press to choose USB source mode.
PR
0~9 Press to enter TV channel number to select channel or digital number.
- /- - Toggle the channel number bits.
Back Press to display the previous channel or source.
VOL+ / - Press to adjust the volume.
Source
The source list should be activated and show on OSD, also the TV will be
turned on from standby mode if pressed.
Mute Switch on or off the sound.
CH + / -
Press to browse through the TV channels, also the TV will be turned on
from standby mode if pressed.
Display
Display
Press to show the information about the input source, TV channel, display
resolution, and press again to clear info display.
Sleep
Press to set sleep timer, setting amount of time before your TV turn off
automatically.
Zoom Press to choose the display aspect.
Menu
Menu
1. Press to activate OSD menu and back to previous level of OSD;
2. Exit OSD.
1. Press to navigate the OSD menu;
2.The cursor DOWN key perform confirmation as well as precede next
level of OSD in Main menu;
3. In directory mode, the cursor RIGHT/LEFT keys function is the same as
VOL+/-, the cursor UP /DOWN keys function is the same as CH+/-.
OK
1. Press to activate the setting/selection of OSD.
2. Press to return previous level.
3.Display channel list or favorite channel.
Red
Hotkeys, these keys can execute the action according to the OSD info.
Green
Yellow
Blue
Freeze
Press to stop the display of TV and make the picture freeze at the
pressing moment.
Picture Press to choose the picture mode.
Audio Press to choose the audio mode.
MT S
MTS*
Press to activate the NTSC TV sounds, such as: Stereo, SAP** or Mono
tone.
Previous Press to go back to the previous music/photo/video.
Play/Pause Press to pause the displaying or restore it.
Stop Press to stop music/photo/video/text.
Next Press to go to the next music/photo/video.
* Multichannel Television Sound (MTS)
The broadcasting standard, which allows stereo sounds to be transmitted with the TV picture.
** Second Audio Program (SAP)
Another or additional audio channel provided for in the Multichannel Television Sound (MTS) broadcast standard. A monaural sound
track included within the recorded or video signal (usually containing a second language translation for the displayed program).
To Next Page
Loading...
Need help?
General
